Meanwell HLG-240H LED Driver

The Mean Well HLG-240H is Mean Well's premium high-reliability LED driver – the one specified for commercial, architectural and hard-to-access installs where you don't want to go back. High efficiency, low heat, built for long service life in harsh conditions.

Features

• IP65/IP67 metal enclosure for indoor and outdoor use
• Wide AC input (90–305VAC) with active PFC
• Very high efficiency (up to ~94% on larger models) – runs cooler, lasts longer
• Protection: short circuit, over-current, over-voltage, over-temperature
• 7-year Mean Well warranty

Specifications

Which type do I need?

• Adjustable (A): Output voltage and current limit trimmable via internal potentiometer.
• Dimmable + Adjustable (AB): 3-in-1 dimming (1–10V, PWM, resistance) plus potentiometer adjustment.

What you need to know

• Sizing: add up the wattage of your LED strip (W/m × metres) and pick a driver with at least 20% headroom – e.g. a 96W load needs a 120W+ driver. Match the driver voltage to the strip (12V strip = 12V driver).
• Dimming: standard and adjustable types don't dim. For wall-dimmer dimming see our phase-cut dimmable drivers; for 0–10V or DALI control choose a B, AB or DALI type.
• Installation: keep out of direct sunlight and allow airflow. Hard-wired installs must be done by a licensed electrician.

Specifications from Mean Well data. Rated current is the maximum continuous output; derate at high ambient temperature per the Mean Well datasheet.

Not sure which driver suits your job? Send us your strip type and run lengths and we'll spec it for you.